Tweet
just had my second Align 100A esc burn up in flight after 20 no problem flights
take off all normal a few loops rolls flips inverted
on my tx timer at 4mins comming in to land total powes loss
recovered heli and the complete ESC body is a fried alloy backplate with no internals at all
this is the second Align 100A to fail in very few flights ?
my set up is DX 7 AR 7000 2.4mAp rx lipo
Thunder power 5000 30c
set using throttle high stick beep beep beep plus notes
the same with low stick
normal thro curve 7
35
72
85
idle 1 & 2 are a flat 85
am i missing something in set up ? before this instance the ESC has been cool to touch as i check immidiatly after each flight HELP
take off all normal a few loops rolls flips inverted
on my tx timer at 4mins comming in to land total powes loss
recovered heli and the complete ESC body is a fried alloy backplate with no internals at all
this is the second Align 100A to fail in very few flights ?
my set up is DX 7 AR 7000 2.4mAp rx lipo
Thunder power 5000 30c
set using throttle high stick beep beep beep plus notes
the same with low stick
normal thro curve 7
35
72
85
idle 1 & 2 are a flat 85
am i missing something in set up ? before this instance the ESC has been cool to touch as i check immidiatly after each flight HELP