copterx 50a esc help

[trebor3515]

hi all can anyone help me with this topic my build it allmost complete apart for the esc programming dont now what im doing
this is what i have

50a esc
xl450 motor 13t pinoin
turnigy 20-30c 2200mah 3c 11.1v

i not that good with the programe sheet with all the beeps

[chucky21022010]

First, you have to calibrate the throttle end points of the esc. Make sure your throttle in your radio is linear e.g. 0-25-50-75-100, then move your collective/throttle stick up before you power up. Be sure that you have remove the pinion on the motor just in case any "hot start " so that you will not injure yourself. Motor will beep while stick is on up position then move the stick on the lowest position and the esc will arm. To go through the parameters menu on your esc, you have to refer to the manual how many beeps. Hope it helps.

[trebor3515]

I forgot to say I'm using belt cp radio et6i