Announcement

Collapse
No announcement yet.

i need HELP!!!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • i need HELP!!!!

    Hi i really could do with some practical and technical help i have aquired a century hawk sport all built and ready to go i have been practicing on the phonixv3 flight sim and can now get the trainer heli to hover 30+ hours of tryingi double checked the hawk with the build instructions has i have a large garden out the back we went and fired ur up what a disaster i have now rebuilt and i am ready to try again but i have lost all confidance in my abilaty i live in york i have tryed to contact york rc club but with no joy And i have tryed to log on to the bmfa site but it keeps telling me the site is corupt i have got my heart set on trying to fly but just need help i am more off a hands on guy show me what i need to do not to good at following on screen instructions any help would be greatfull DAZ

  • #2
    welcome to the forum What went wrong in the garden ? this site may be of help to you
    RADD'S SCHOOL OF ROTARY FLIGHT?
    https://www.benchtech.co.uk/
    Blade 400 3D

    Blade MCX
    Phoenix
    DX6i

    Comment


    • #3
      Simple answer I'm afraid. You need someone to check it out for you. You also need to fly something on Phoenix that's close to your heli.

      When you start you should be using a training undercarriage and to begin with don't even try to take off. Just check that the rotor moves in the right direction when you move the right hand stick. Do the same for the rudder or tail. If you are not sure of the right directions then look on Phoenix at the rotor disc as you move the aileron and elevator control. Expect the heli to move to the left as you take off and be ready to tilt it slightly to the right. Only try the briefest of hops to begin with, don't try to hover, just gently off the ground and down again. The swash should be level when the right hand stick is central.
      Flasher 450 Sport. Assan GA250 with 520 tail servo, MKS DS450 cyclic.
      Multiplex Cockpit Tx, DX7, DX6i
      Blade 130-X, MSR, MSRX
      Phoenix Sim

      Comment


      • #4
        help

        I have my trainer under carraige on and have run hear up again every thing seems to operate has it does on the phonix flight sim i thing i just have to try and build up my confidence slowly Daz

        Comment


        • #5
          I don't know your size of heli except on the sim. The sim is not the same as real life. Just because you can fly on the sim does not mean you can fly for real. The sim is very useful, but you have to learn the difference between flying for real and flying on the sim. The reference to Radd is very good. You might find that something like an mcx or an msr easier to get on with as they will survive most hard landings. I would find the local flying field and pop down there with the model and ask for advice. The person you bought it from might be helpful. How did it fly when he showed you it flying?

          Chris
          Flasher 450 Sport. Assan GA250 with 520 tail servo, MKS DS450 cyclic.
          Multiplex Cockpit Tx, DX7, DX6i
          Blade 130-X, MSR, MSRX
          Phoenix Sim

          Comment


          • #6
            Thanks im trying to get that help

            Comment

            Working...
            X