If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
After I soaked a bolt in it, and dry it, the bolt is bone dry.
Also, my threadlock has always held nicely after cleaning the bolts with surgical spirits so I don't think there's a problem.
Not saying ignor what the other guys are saying, they know what they're talking about. But seeing as you have just bought 500ml of surgical, I don't see the point in wasting it when it works just fine.
Jonny
Spose youll be ok if you fancy a few pearcings/tattoos
GAUI X7 Beast X V3 (a nice bit of fish!)
Trex600n Fbl ys56sr BeastX V3
Trex500Fbl AR7200BX
Trex500 Apache x4bld BeastX. Trex 600E HIND mil x5bld BeastX
DX7se
If your are using Isopropyl, what method do you use. Just been reading the warning on the back of the bottle and it doesn't look good to be incontact with your skin. Are people wearing gloves, or just putting a bit on a rag and wiping the bolts etc ??.
IPA is used by medics to clean injection sites so it can't be all that bad in terms of skin contact. I believe the medical concentration is 70% IPA with water.
As mentioned above it WILL degrease your skin so a bit of moisturiser after using it wouldn't go amiss.
Koz Total Relative noob Logo 400, TRex 450SEv2, Blade 400, mSR, mCX, HK450(build), DX7, Phoenix Simstick ..... AXN Clouds Fly, Night Vapor, HC Mosquito
I've found a way to halt reckless heli spending ... Go Broke.
Brake cleaner, Carb cleaner, meths, all work fine so does thinners and much cheaper but keep it away from plastics. also very good for getting sticky tape residue off cables & a thousand other uses as long as your careful
Comment