Announcement

Collapse
No announcement yet.

Just a quick gyro question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Just a quick gyro question

    I know this is most likely been asked before, but can you change your gyro mode from HH to rate mode while in flight by using your transmitter. As i notice on the sim it far easier doing simple circuits like figure of 8's, while the gyro is in rate mode. Then have it in HH for hovering etc.
    Liam

    T-rex 700 LE- V-bar 5.2 | OS91 HZ | 3xDS610 | Tail DS650 | Switchglo Pro | Radix 710s
    T-rex 600 LE- OS 50 Hyper | 3xDS610 | Tail DS620 | GP 750 | Align Blades
    Outrage Fusion 50-BeastX | Scorpion Motor with Kontronik Jazz
    Blade MCP X
    Spektrum DX8

    Phoenix with Simstick

  • #2
    Yes
    Graham



    University of life. Studying cool .
    HK 500GT, 450 (Scorpioned) Pro clone, TT Innovator MD530, Trex 450SE (Slowly being recommissioned) mCPx,
    mSR MD500E, CX2, mCX, PKZ Micro Mustang (All gathering dust)
    Phoenix, DX6i.



    x2







    Comment


    • #3
      Yes you can, but when it comes to flying real RC helicopters, it is unlikely that you will ever want to. Rate mode can be used to establish a really accurate centre tail during the model setup flights, but other than that is pretty much redundant these days.
      JR Vibe Fifty fb (YS56)

      Comment


      • #4
        It just seems that much easier doin fast forward flight using rate mode. So would you suggest i dont get used too it and stick too just HH. I never knew it was possible as i thought you had too have specific type of gyro for each mode
        Liam

        T-rex 700 LE- V-bar 5.2 | OS91 HZ | 3xDS610 | Tail DS650 | Switchglo Pro | Radix 710s
        T-rex 600 LE- OS 50 Hyper | 3xDS610 | Tail DS620 | GP 750 | Align Blades
        Outrage Fusion 50-BeastX | Scorpion Motor with Kontronik Jazz
        Blade MCP X
        Spektrum DX8

        Phoenix with Simstick

        Comment


        • #5
          Much better to learn to fly the tail tbh. I would stick to HH if I was you
          Graham



          University of life. Studying cool .
          HK 500GT, 450 (Scorpioned) Pro clone, TT Innovator MD530, Trex 450SE (Slowly being recommissioned) mCPx,
          mSR MD500E, CX2, mCX, PKZ Micro Mustang (All gathering dust)
          Phoenix, DX6i.



          x2







          Comment


          • #6
            Ok doke, rate mode off!
            Liam

            T-rex 700 LE- V-bar 5.2 | OS91 HZ | 3xDS610 | Tail DS650 | Switchglo Pro | Radix 710s
            T-rex 600 LE- OS 50 Hyper | 3xDS610 | Tail DS620 | GP 750 | Align Blades
            Outrage Fusion 50-BeastX | Scorpion Motor with Kontronik Jazz
            Blade MCP X
            Spektrum DX8

            Phoenix with Simstick

            Comment

            Working...
            X