Announcement

Collapse
No announcement yet.

occilating trex se

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • occilating trex se

    hi
    after about 5-6 mins flying my trex starts to occilate slow at first but gets worse as i continue, have changed and lubed the orings in the head with no change , any ideas:

  • #2
    Is the headspeed decreasing at this point in your flight?
    It could be that you are reaching the end of the pack and need to land.

    Cheers,
    Rob
    Team Align, Midland Helicopters, Optifuel, Cyclone Blades, Scorpion Motors, Thunder Power, Savox Servos, JR Propo

    | 3D Championship

    Comment


    • #3
      once the headspeed starts to drop your in the "your causing damage to the pack" area. you should stop flying before this happens.

      i will let one of the duracell monkeys explain exactly how to work out how long to fly for :-)

      i think a general rule of thumb is when you recharge you shouldnt put more than 80% of the capacity of the battery back in once its fully charged. Ash limits his 450se V2 to 4.5mins i think but then its gets seriously abused, especially when he lets me fly it :-)

      Ade
      www.accurc.com
      adrian@accurc.com
      This is an apple free zone
      anybody can be an Arsehole, it takes real commitment, dedication and a whole lot of effort to be nice.

      Comment


      • #4
        thanks for reply yes think is slowing a bit but it never used to do this at all have tried new thunder power batt but seems same, but am now starting to push a bit harder on power and you may be right , thanks
        jerry

        Comment


        • #5
          That oscillation can also be too tight or too slack blades in the blade grips.
          www.heli-extreme.co.uk a good club in south Sheffield
          600n pro BeastX Align DFC head bls251, 3xbls451, align gov, 600d, 2in1
          trex500, BeastX DS510 swash, Beast X cutr and carve head DS520 HK3026-1900, Align 425D blades, 5S4200 rev'trix, K&BDD dampers, AR6200
          "450" superframeSTK, align DFC head v2tail, hk22281-8 on 3S 9650w9257gear commander 55A align 325D hitec digitals Tarot ZYX, AR6100e
          MCPX kbdd tail and blades, miniaviation bats

          Dont spend more flying models than it costs to fly for real

          Comment

          Working...
          X