rapier 250

[Guest]

just bought 250 rapier, problem is, when i thottle up the swash-plate go,s down instead of up. can anybody help me please,, thank,s

[Paulice]

Hi and welcome to the forum.
Assuming you have 3 servo CCPM mixing in your tx. somewhere on your transmitter you'll have swash adjustment, you will normally see
Elv + or - 50%
Ail + or - 50%
Pit + or - 50%
so if your Pit is at -50% you need to change it to + 50%
OR you'll have a little switch on your tx for pitch direction that is set wrong.
I don't know your heli, so could be wrong, but it's a place to start.

[Farmer Giles]

Just double check that even though the swash goes down it's not adding +ve pitch.

I don't know your heli either but if it's some kind of RTF model then I would assume it's been flown before it left the factory and having the pitch reveresed would be pretty obvious..

2p

[Boggy]

some models do this. (blade 400 is one) check and see whether your getting positive pitch before adjusting anything

[Guest]

rapier250 set up problem

thanks for the advise peaple, much appreciated

[sas]

just got one of these straight out the box o yes smooth little bird