Announcement

Collapse
No announcement yet.

I dont understand

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • I dont understand

    Hi all. got this problem with my trex 450. Just as it seem I am about to lift off. A strange wirring sound occurs and I lose power. Posted a vid on Utube to show the problem. Anyone with ideas on what this problem is, please share them with me as I am a total noob and need all the help I can get. Cheers. Here is the link [ame=http://www.youtube.com/watch?v=7LXNoTHMXYU]YouTube - 03092010010.mp4[/ame]

  • #2
    The tail kicking looks like the ESC protection cutting in. To prevent (or warn of) an impending serious loss of power dues to a drained or otherwise defective battery, the ESC causes the power to the motor to "pulse", thus causing the tail to kick.

    It's a "better land it now" signal really.

    Two possible causes:

    - A defective ESC or more likely,
    - A drained or defective battery

    EDIT: one other thought just occurred to me. Check the tail drive belt tension. A loose and slipping belt would cause the tail to kick but would not account for the loss of power.
    Last edited by Mart61; 03-09-2010, 12:19 PM.
    Martin

    Most of the Aligns, fair few Spektrum bits, bunch of Align & HiTec servos, OBE, VD & Bar.

    Comment


    • #3
      esc problem or radio problems i would say
      Kel Velocity 50 sk-720 ,Fusion 50 v-bar pro 5.2 ,Velocity 90 v-bar pro 5.2 & JR DSX11 ,Phoenix and a fridge full of bottled water RCHA Courier Services PM for Details www.parcelshipper.co.uk and www.impactexpress.co.uk

      Comment


      • #4
        Thanks Martin. I am at a total standstill. Does it with both batteries I have for it. Brand new ESC. Could it be an error in setting up the ESC do you think? Regards Phil.

        Comment


        • #5
          trex 450

          just had exact same problem it burnt out the esc.
          changed it for a new one within mins same prob.
          diagnose! faulty batt!
          fitted new esc now with new batt ok!.

          Comment


          • #6
            Originally posted by flip4444 View Post
            Thanks Martin. I am at a total standstill. Does it with both batteries I have for it. Brand new ESC. Could it be an error in setting up the ESC do you think? Regards Phil.
            What ESC are you using? If it's this one, take a peek at the settings contained in the manual and set the ESC up appropriately.

            Are the batteries new too?
            Martin

            Most of the Aligns, fair few Spektrum bits, bunch of Align & HiTec servos, OBE, VD & Bar.

            Comment


            • #7
              It was my programming of ESC. Just followed Finless's guide vid on programming Align ESC and all is good now. Thanks for the tip on it being an ESC problem guys. Cant wait to fly her now. Once again thanks.

              Comment


              • #8
                Nice one! Glad it was a simple (and cheap) fix!

                Martin

                Most of the Aligns, fair few Spektrum bits, bunch of Align & HiTec servos, OBE, VD & Bar.

                Comment


                • #9
                  Love the test area - keep safe

                  sigpic Trex 700 OS91,Vbar,S9254,DS610,NHP
                  Trex600LE, OS50,Vbar,LTG6100,DS610X4,NHP
                  Raptor 30V1 Maverick Head
                  OctoCopter
                  Futaba 14SG


                  Guinness World Record Pilot 2011/12



                  Comment


                  • #10
                    Took me a while to work out where you were flying her!! Boing!
                    Synergy N5 -BeastX
                    450 Pro -BeastX
                    Black Horse Sukhoi 31
                    DSX9
                    Eagle RC Heli Club

                    Comment

                    Working...
                    X