Announcement

Collapse
No announcement yet.

A bit of Tail wag

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • A bit of Tail wag

    Hi guys,

    Is it normal for a heli to try to swing the tail anticlockwise whilst power is applied? In mine I have to overcome this tendency by applying a bit of opposite rudder as I apply power whilst trying to hover. I'm reasonably comfortable with it now and I'm able to work around it, my tail just moves a little more than I have seen on some vids. I'm guessing I need to up the gyro gain a little. I think the problem may also be that I don't have a 'proper' tail servo, just a standard cheapy. I also have the gyro centrally mounted, should I forward mount it so that it picks up the tail movement faster?

    I'm now able to hover reasonably well, another 6 or 7 tanks and i'll be getting there. I can keep the heli off the ground at a height of between 1 feet and 5 feet throughout the duration of a tank of fuel, I can also keep it within a 4-5 metre box in the same time period with some mild wind. I'll not be happy until I can close the box into about 2m and keep the height steady at between 3-5 feet. Only then will I allow myself to progress onto side on hovering.

    looking forward to the replies

    Jonny
    Hirobo Shuttle
    Hirobo Sceadu
    Black Horse Extra 330 .40
    Lots of spares

  • #2
    I have just found out why my tail was moving with the heli. When I was setting up my heli initially I set the gyro gain on my radio to 65% so even though my gyro was set at 100% it was not being allowed to do its thing. I reset the gain to 80% and now the heli is a different machine altogether. If it wasn't for the slightly blustery conditions giving me sudden changes in height I think I could say that I'm now able to hover tail in.

    I'll give it another few tanks of fuel as it is before I try side on hovering.
    Hirobo Shuttle
    Hirobo Sceadu
    Black Horse Extra 330 .40
    Lots of spares

    Comment


    • #3
      Glad you got it sorted out.

      What heli is it that you're flying?
      Martin

      Most of the Aligns, fair few Spektrum bits, bunch of Align & HiTec servos, OBE, VD & Bar.

      Comment


      • #4
        A cheap 2nd hand size 30 shuttle, very old but flys well. I'm happy that I bought a good 2nd hand model as I don't really care what happens to it so I'm more likely to push myself on more.
        Hirobo Shuttle
        Hirobo Sceadu
        Black Horse Extra 330 .40
        Lots of spares

        Comment


        • #5
          What gyro is installed? Is it the big old chunky Futaba FP-G154 as most Kyosho's seemed to have or something more modern?
          Simon (3door4x4)

          Blade 120SR, Blade 400 both bonded to my DX6i
          Kyosho Concept 30 SR-T hybrid on old 7 channel JR analogue set
          Thunder Tiger Raptor 30 V2 with TT RL53-H going into Airwolf Funkey 30 Fuselage - ongoing project!

          Comment

          Working...
          X