Announcement

Collapse
No announcement yet.

Learning to fly Twister 3D blog. (video's included).

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Learning to fly Twister 3D blog. (video's included).

    Hi all, just wanted to share my progress with you all, i will have this as my blog thread unless any objections. so i have posted the flying to date here.

    Ps. before i start, i just want to point out that although the videos start in nov 09 these video's are pretty much all the flights i had, up untill recently when i have been able to fly without crashing now it is setup propery.

    [ame="http://www.youtube.com/watch?v=bBZTG-RWBB4"]Maiden flight.... *cough*[/ame]

    [ame="http://www.youtube.com/watch?v=TCoWRIy7_mk"]Maiden Flight pt 2[/ame]

    [ame="http://www.youtube.com/watch?v=ubsCPZIGkwY"]The Crash[/ame]

    [ame="http://www.youtube.com/watch?v=dKPcux-QgoM"]months later after heli setup properly - pointless, but its my progress lol[/ame]

    [ame="http://www.youtube.com/watch?v=zI_NULOLHik&feature=related"]same time as last, as you can see it doesn't take much to get me excited lol[/ame]

    [ame="http://www.youtube.com/watch?v=p1PAy57Sum0"]After setup correctly, before i ventured to field lol[/ame]

    [ame="http://www.youtube.com/watch?v=Xp1hTbcgZvg"]3rd June 2010[/ame]

    [ame="http://www.youtube.com/watch?v=JtQI0EPShe0"]23rd June[/ame]

    [ame="http://www.youtube.com/watch?v=p1D1rMQOArk"]Today 30th June[/ame]

    Hope you like and i will add as i can.
    Last edited by RookieRC; 30-06-2010, 02:40 PM. Reason: Video added

  • #2
    Keep at it m8 your getting there
    Graham



    University of life. Studying cool .
    HK 500GT, 450 (Scorpioned) Pro clone, TT Innovator MD530, Trex 450SE (Slowly being recommissioned) mCPx,
    mSR MD500E, CX2, mCX, PKZ Micro Mustang (All gathering dust)
    Phoenix, DX6i.



    x2







    Comment


    • #3
      Cheers Tiddler

      Comment


      • #4
        New video added

        Comment


        • #5
          Time to try a bit of side on hovering me thinks
          Graham



          University of life. Studying cool .
          HK 500GT, 450 (Scorpioned) Pro clone, TT Innovator MD530, Trex 450SE (Slowly being recommissioned) mCPx,
          mSR MD500E, CX2, mCX, PKZ Micro Mustang (All gathering dust)
          Phoenix, DX6i.



          x2







          Comment


          • #6
            Cheers mate, i'll try that...after i get some major simulator time on it first lol

            Comment


            • #7
              Doing well buddy but dont try to run before you can walk. Nail the tail in hover then both sides followed by nose in. Dont rush take your time and have fun.
              Mike, 3rd Hampton Scout Group
              Spectrum DX7
              Piper Pawnee 40
              Wot Trainer, OS 46Fx
              3D 400
              P68C Scale twin
              SRCMC
              www.controltower.pwp.blueyonder.co.uk/1.html


              Pround owner of an EGS

              Comment


              • #8
                Originally posted by spunkmyer View Post
                Doing well buddy but dont try to run before you can walk. Nail the tail in hover then both sides followed by nose in. Dont rush take your time and have fun.
                taking your time will pay dividends later! Looks like you are enjoying your new hobby, keep at it. I'm looking forward to seeing how you progress.

                Cheers,
                Simon


                BNUC-S certified
                ---Guinness World Record Pilot 2011 & 2012---
                sigpic

                Comment


                • #9
                  Hi guys, thanks for the comments and encouragement, it helps alot.

                  I'll continue with practising tail in for now.

                  An i ask a question though.....i dont think my heli is perfectly trimmed and i was wondering the best way to see if its slightly out of trim?

                  I know it moves to the right all the time but i want to keep it like that so its not over trimmed when i start moving forwards, but i mean with it being out of trim forward/back.

                  Thanks again.

                  PS am getting a key chain cam soon so will be putting it on heli

                  Comment


                  • #10
                    well done mate!!
                    I learned to fly with a Twister 3d that I bought In September, there a great little heli.
                    your doing well,
                    one thing I would say is,
                    As landings and take offs are getting smoother it's time to remove the training gear as it is of no use at the height you are flying, and if anything making a stable hover a lot harder, especially in the wind.


                    GrahamC
                    Grahamc

                    Phoenix,
                    Futaba T8FG,
                    Spektrum DX7S,
                    Blade 130x
                    Trex 250,
                    Trex 450 Pro
                    Trex 600 Pro unbuilt in the box
                    Trex 600 NSP FBL BeastX
                    Trex 700 LE FBL BeastX
                    Some Fixed wing

                    Comment


                    • #11
                      Originally posted by twister440 View Post
                      well done mate!!
                      I learned to fly with a Twister 3d that I bought In September, there a great little heli.
                      your doing well,
                      one thing I would say is,
                      As landings and take offs are getting smoother it's time to remove the training gear as it is of no use at the height you are flying, and if anything making a stable hover a lot harder, especially in the wind.


                      GrahamC

                      Cheers mate, i got a video that i took a little while ago and i was flying round, its only about 4 mins in that i feel bold haha. i'll try editing it so there isnt my hovering and getting the balls to try flying.

                      Comment

                      Working...
                      X