hitec or sanwa servos???

[heliward0]

hi a quick question about servos would you guys put hitec hs325hb or sanwa srm102 sevos into a raptor 30/50???? given to me FREE if i want them so i know you will say that i should buy something else but would like to use these so any KIND WORDS would be good thanks,,,

[ChrisB]

For general flying,either will be fine,something like a 3152 would be better but they will get you airbourne,,used to use Sanwa 102`s when i started and look at me now

[Raptormadsteve]

hi a quick question about servos would you guys put hitec hs325hb or sanwa srm102 sevos into a raptor 30/50???? given to me FREE if i want them so i know you will say that i should buy something else but would like to use these so any KIND WORDS would be good thanks,,,

Hi for just floating around they would be ok. But if you give them stck i'e panic drop will probably shear the gears. i used 148's when learning served me well and still going strong when i sold the heli!
Steve

[heliward0]

will be used a trainer heli(my first niro) so yea general hovering and wot not THANK YOU for advise guys!!!

[ChrisB]

You are very welcome,they will do fine

[Ade_Law]

use them on the throttle but i would def think about buying something better for the collective pitch such as a 3152.

The reasoning behind this is that low power analogues will show quite a dead band. the cyclics tend to self centre a fair bit so the deadband shows up like expo. Its not ideal but its useable.

on the pitch its a different matter. the pitch will try to stay where it is most of the time.

So there you are in the hover...... gust of wind comes through and the heli climbs. you move the stick a little and nothing happens. so you move it a little bit more and oops thats too much. so you push the stick back up again nothing happens... so you move the stick a little more and ooops thats too much.

for the sake of 25ukp i would personally not stick anything less than a 3152 on the pitch.

Ade