Tweet
hi today was my 1st small flight, as a beginer i was waiting for better weather as in the past i killed two servos without even getting of the ground. well today i did some small hops with no damage (so far) also i learned to put new gears in servos lol. seriously im very happy it was at last airbourne even if only briefly. basicly im trying to learn how to hover.
-
-
Well done m8
Keep at it, you'll soon get the hang of things
Graham
University of life. Studying cool .
HK 500GT, 450 (Scorpioned) Pro clone, TT Innovator MD530, Trex 450SE (Slowly being recommissioned) mCPx,
mSR MD500E, CX2, mCX, PKZ Micro Mustang (All gathering dust)
Phoenix, DX6i.
x2
-
thanks it recharging now for this afternoons flight heheheComment
-
Well I don't know what the weather is like where you are, but its pretty dam windy here.
Learning to fly helis and wind don't mix very well
So unless you've got a nice large indoor space to use, I would hang on and wait for a nice calm day for your next flight tbh.
Just a suggestion
Graham
University of life. Studying cool .
HK 500GT, 450 (Scorpioned) Pro clone, TT Innovator MD530, Trex 450SE (Slowly being recommissioned) mCPx,
mSR MD500E, CX2, mCX, PKZ Micro Mustang (All gathering dust)
Phoenix, DX6i.
x2
Comment
-
Well done for those first steps. What are you flying?
If you can get the heli up out of its "ground effect", it will be easier to control than closer to the ground. Higher than the rotor diameter should be fine.
Mike
TRex 600NSP, OS55, MicroBeast
TRex 500ESP
TRex 450Sport,TT, Scorpion 2221/8,
Futaba 14SG Optifuel 20%
Member RCHA BMFA BMAC BALPA BARCComment
-
nice one- wind can make things a little too stimulating at the start- well worth waiing for calmer conditions- cheaper too
Every step is funSynergy N5C with 3GX on the bench
Trex 500 ESP FBL BeastX -soooooooooo fast
Trex 700 LE Beast X'd and no sticky out bits
Velocity 90 BeastX FBL-the love affair has begun!
Newton Abbot Heli CLub where the sun always shinesComment
-
Well done! Keep it up...
Martin
Most of the Aligns, fair few Spektrum bits, bunch of Align & HiTec servos, OBE, VD & Bar.
Comment
-
Nice one, well done!! What are u flying? - hopefully my time will be very .. very soon! lolIf you can keep your head, when all others around are losing theirs - you have probably not understood the seriousness of the situation!!Comment
-
hi guys
its a twister storm, your right about the wind it was all going quite well then a gust caught it i lost control and it crashed going to have to change the blades but cant find a tool that fits yet. hopefully thats the only damage. i was getting there it was hovering lol
today taught me something i think with practice i will be able to do thisComment
-
Being a beginner myself i find the worst bit about the wind is when your hovering about six foot up and a breeze comes along and lifts it another couple of feet in the air and you think oh sh*t i didnt want to go that high.Comment
Comment