Announcement

Collapse
No announcement yet.

yawing like crazy

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • yawing like crazy

    My medevac is rotating like crazy to the left. I did not crash, and nothing looks broken... can this only mean that one of the motors are broken?
    Twister Bell MedEvac

  • #2
    have you checked every thing posted in your previous thread?
    Tom
    ---------------------------------------------
    ---T-rex 600n---Knight 3D---T-rex 450 se v2---
    ---------------------------------------------

    Comment


    • #3
      Originally posted by fatmantom View Post
      have you checked every thing posted in your previous thread?
      my last thread was about shaking?
      Twister Bell MedEvac

      Comment


      • #4
        lol yer sorry im getting all confused. have you checked the grub screw at the bottom (under the cog) is tight and not slipping atall?
        Tom
        ---------------------------------------------
        ---T-rex 600n---Knight 3D---T-rex 450 se v2---
        ---------------------------------------------

        Comment


        • #5
          Originally posted by fatmantom View Post
          lol yer sorry im getting all confused. have you checked the grub screw at the bottom (under the cog) is tight and not slipping atall?
          I'll try to take everything appart and screw it back together... it makes a different sound now by the way..
          Twister Bell MedEvac

          Comment


          • #6
            if the noise is very mechanical, check the motors, if a motor is shot and earths out, it will blow the contoller, (trust me I know).
            You have been warned lol
            Rob
            TDR (in progress)
            SAB Goblin 700
            Vibe 90SG Vibe 500E
            Trex 700 VBar, Trex 700 BeastX
            Trex 600FBL, Trex 600NP, Trex 450Pro
            Kalt Baron30
            sigpicproud owner of Four Eddie Gold Stars

            Comment


            • #7
              Originally posted by fatmantom View Post
              lol yer sorry im getting all confused. have you checked the grub screw at the bottom (under the cog) is tight and not slipping atall?
              now I have tightenedeverything, but it still rotates... and makes a weird sound
              Twister Bell MedEvac

              Comment


              • #8
                Originally posted by Kwickkwack View Post
                if the noise is very mechanical, check the motors, if a motor is shot and earths out, it will blow the contoller, (trust me I know).
                You have been warned lol
                is there anything I can do with the motors? other than buyin a new one of course (what do you mean with "blow the controller"?)
                Twister Bell MedEvac

                Comment


                • #9
                  i had a motor go down and it took out the 4IN1 TOO!!!!not funny,,
                  sigpic

                  Comment


                  • #10
                    Originally posted by heliward0 View Post
                    i had a motor go down and it took out the 4IN1 TOO!!!!not funny,,
                    but can it be te 4in1? both motors are rotating, and the sound change is only that it has a higer pitch
                    Twister Bell MedEvac

                    Comment


                    • #11
                      http://www.flyingsites.co.uk/howto/b...oubleshoot.htm try looking on here for help.
                      sigpic

                      Comment


                      • #12
                        or set your proportional screw level with the boom (ie horozontal) it may of moved?? set it with the power on then disconnect the battery and then reconnect it,, check that the gyro is about 90% too.. see your manual under PRE-FLIGHT CHECKS 4in1,,and is your battery fully charged or low???
                        sigpic

                        Comment


                        • #13
                          is it a squeeky noise that goes on and off or is it constantly high
                          Tom
                          ---------------------------------------------
                          ---T-rex 600n---Knight 3D---T-rex 450 se v2---
                          ---------------------------------------------

                          Comment


                          • #14
                            If the Medevac has had a few knocks the top rotor hub can loosen on its shaft causing it to slip, this will give the symptoms you have, as will a knackered motor, they sometimes seem to have short lives.
                            Steve H

                            http://www.himbletonRChelicopters.co.uk
                            Trex 600N, Trex 700N, now 3G!, Raptor E550 now in fetching Hughes 500E, Trex 250, Trex 500CF, Trex 550E 3G, Beam E4, Outrage 550, Logo 500 3D.

                            Comment


                            • #15
                              havent touched my broken medevac for a while now bevause of exam period, but now I feel the urge to fly again.

                              as I posted earlier the heli is yawing like crazy, and when I try to turn the engines, it feels like there is less resistanse in the motor that turns the top blades. (heli yaws to the left)
                              Is this a good symptom for a broken motor? Is it possible to open the engine and do something? I have a soldering iron and som skils, but never opened an electric motor before.

                              Martin
                              Twister Bell MedEvac

                              Comment

                              Working...
                              X