phoenix & dx7

[oceanbeach]

when using my dx7 with phoenix it will only work with the dx7 turned off even though the software is saying turn it on, is this normal

sorry if it's a daft question but i am a bit puzzled!

[adieuk]

thats normal m8

[oceanbeach]

thanks pal, should i make any particular adjustments in the dx7

[adieuk]

if you are new m8
i would dial in about 20 to 30% expo
until you are used to it

[oceanbeach]

well you've lost me there pal but thanks anyway

[adieuk]

if you go into setup menu
and scroll down untill you get to
D/R &EXP
change your aile to +20 or +30%
change your elev the same as above

[oceanbeach]

thanks i'll try that, what will that do

[Weebl]

You can also do it in Phoenix in the settings, this means you can set different expo for different heli's

Expo stands for Exponential and it allows you do dull down the response of the sticks in the first part of their travel, the higher the percentage, the more dulled down over a longer stick throw it is.

[oceanbeach]

thanks for a nuggit like me this is very helpful

[adieuk]

no worrys mate
ill be on phoenix in 10 mins
session name eaglercheli-club
if you need more setups m8