Announcement

Collapse
No announcement yet.

Twister Skylift Help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Twister Skylift Help


    I have recently bought a secondhand Twister Skylift Chinook which has been working perfectly, less said about the pilots skills. I recharged the 2 batteries I have the the heli, connected them up the 3-in-1 unit LED shows a RED light and not a GREEN light as shown in the instruction manual. Both batteries are fully charged. I can operate the Cyclic control stick and there is movement, but on operation of the Throttle/Yaw stick there is nothing.

    All help or ideas would be most appreciated.

  • #2
    does the transmitter battery lights flash when you switch it on?

    if so you have to arm it,so make sure you plug in the battery when it is flashing to make the throttle arm.

    also make sure the throttle trim is all the way down to the bottom.

    see how you go.
    Last edited by heliboy; 17-08-2009, 12:40 PM. Reason: typo

    Comment


    • #3
      Move the throttle trim switch all the way down.
      Today's outlook is fine for flying.
      • Spektrum DX18 gen2, Phoenix Sims, Align MR25XP.
      • Blade Nano, mCP X, 130x, Blade 180, Mini T 450se
      • Trex 250dfc Gpro, Trex 500EFL Gpro.
      • Trex 600E Gpro DFC, Trex 600NSP now Gpro, DFC, Redline 56
      • Flickr Through My Pictures.
      • A helicopter is an aircraft that is lifted and propelled by one or more horizontal rotors because Wikipedia said so.

      Comment

      Working...
      X