cheapest place ofr???

[dan2009]

hi guys where is the cheapest place to buy main blades for a trex450 sev1, i understand that you can i) get them for basic flight
ii) get them for stunts
at the minute i only need them for the basics.
thanks
Dan

[David Drew]

Midland Helis
Revolution Models
Real Raptors
Fast Lads

.............etc

Try any of them for basic blades

[SadSack]

smartmodel.com.hk

Just ordered some and 4days later there here! CF Main Blade Pro one i had ok not as good as align 325 carbons but $17 shipped can't be bad
They have cheaper versions but can't comment on them.

Web sites little rank but i got what i asked for so ok for me

[Grant85]

hi guys where is the cheapest place to buy main blades for a trex450 sev1, i understand that you can i) get them for basic flight
ii) get them for stunts
at the minute i only need them for the basics.
thanks
Dan

For my 450 i use these;
Blink Helicopters - Home of the Outrage !!!!
they are fibreglass and are cheapest i have found.They are ok for sports flying,hovering.Please note the blade length is 325mm from root to tip,not from hole to tip as they would be 335mm.I havn't noticed the 10mm difference and they are alot more stable than the woodies and for a fiver you can't go wrong



Or look here,loads of choice and cheap;
http://www.helidirect.com/main-rotor...17_120_785.hdx

[dan2009]

blink helicopters is a great shop, nice and cheap!!! i need some new blades due to an acident to day! again due to a wind factor, i was doing so well, even my brother and sister were amazed by it! so thanks for the link to a nice cheap shop mate!

[dan2009]

i have just ordered the following:
1 xTrex 450 -HS1072T-SF Mixing Lever Set(XL)£8.101 xTrex 450 -HS1048T-Main Rotor Holder & Housing Set(3K)£6.071 x325mm PRO 3D FRP Fiberglass Main Blades
so it was just over £22 delivered! great!
now i was wondering can i get the sf mixing lever in aluminium? or anything other than the plastic i currently have them in?
thanks again
Dan
PS this is one of the most helpful forums i think i have ever been on

[Grant85]

Glad you're sorted now Dan

[dan2009]

hehe i am indeed...oh and i am joining the local club soon, been for a chat today, they only have 3 guys who fly heli's but its better than none, and one fo them is meant to be happy to help, so that will be great! i will always be ahppy to pass on help in the future if someone asks me...best way to keep a good hobby going rather than blank some body!
big thanks to you grant for that shop link though!
ps
do you know where i can get a none plastic conecting plate for the training kit legs?

[Grant85]

Dan,I'm not too sure about the training kit connector,as the training kit i used when learning to hover was just two long lengths of carbon rod that crossed over one another in the middle so i didn't need a connector mate.

[callum]

Wow, they have a Trex 250 clone on there...

Maybe ile order :P only £45

Very tempting!