Transmitter trouble

[Shamille]

Hey gang, I'm new to these forums, so hiya and thanks in advance .

I can't get my Lama v4 Heli to recognize my transmitter. I have no idea why this is occuring. I turn on my TX first and then my RX and it starts to calibrate then it starts to start up on it's own and then nothing. This goes on for a good 20 mins before I lose patience and give up.
I don't touch the TX while doing this and the trims and throttle are at minimum.
Any help or advice would be much appreciated.

Thanks

[Mart61]

Hold fire - I'm sure someone on here will have an answer for you...

[cjcj1949]

More info might help. Has it ever worked? What type of Tx is it? Is it 2.4G or ppm/pcm?

Chris

[phockzie]

Hi Shamille and a warm welcome to the best helicopter forum in the universe

Check that the crystals are not missing from the receiver inside the heli canopy and from the back of the transmitter, they should both have the same channel number on them. If you don't know how to do this then take the model to your local model shop, they should be able to help you with this.