changing Gyro gain on Blade 400

[redlinezak]

Can someone tell me where to change the gain on my blade (with DX6i) to try and stop the tail wagging? Im not sure if i need to put the gyro on rate mode or something or can i change it on the DX6 and where is it iin the menus?

Cheers

[Brian Gifford]

Try this thread from the resident Blade guru : -

http://www.rcheliaddict.co.uk/f105/d...ade-400-11183/

[redlinezak]

Yeah i have used those settings but after a rebuild the tail has started wagging a little and im not sure exactly what setting to change.

[Brian Gifford]

Sorry. You'll have to wait for one of the experienced guys to pick up on your request.

[maderdog_1024]

on the dx6i in the menu look for "gyro"

you have two modes
0 - should be 60-80 for heading hold - you need to lower this one by a few percent to stop wag.
1 - < 50 for rate mode

[Boggy]

hi red if your using my settings you wont have a rate mode.in the gyro menu lower the higher value down by 1% at a time and try it.