Phoenix and DX6i

[Mojo]

Hello All,

I have been using Phoenix and am able (with a lot of practice) to hover the 50 size trainer very well. Started flying the B400 and can hover it and land it (although it always drifts from me and can never keep it steady). Hopefully that will improve the more Sim time i put in..

The question is, i used an empty model on my Tx and did not change any settings on it (and not on the Sim either).. In a moment of clarity (maybe not) i thought if i put Boggy's B400 beginner setting into the Phoenix model on the Tx it might make it easier to control the blade.. Using these setting however, make me completely unable to control it (i think i managed a 1 second or less hover before it crashed).. Switched back to the original setting and it seems tame again..

Has anyone had this problem before? how can i make it easier to fly the heli on the sim, as obviously the settings i tried do exactly the opposite?

Any comments would be welcome..

Cheers,

Mo

[sacko]

You need to change the swash plate settings

Create another model called Phoenix , but for the life of me I cannot think what you need to change it to.

90o? Maybe

[sacko]

Change it to 1Servo90

http://www.rcheliaddict.co.uk/f105/dx6i-help-needed-includes-video-19005/

[Mojo]

Cheers mate..

Just to make sure.. put the B400 begginer settings in the Tx under a new model but change the swashplate settings to 1Servo90?

[sacko]

You should have two models on your Tx, one being youur Blade 400, the other one which you have created called Phoenix.

Under the Phoenix model you will need to change the swash settings

[Boggy]

here's one i made earlier!
http://www.rcheliaddict.co.uk/showpo...3&postcount=23

[Mojo]

Thanks guys!!

Much appreciated..