~TREX 450 SE Pics~

[Xige]

Hi Guys,

Just a few pics of my trex 450 se, hope you like:
(please excuse that ive put a sev2 canopy on it as the original one is a bit broken, and plus i like the look of the v2 canopy =) )

[acwman]

Nice shiny heli!

You may want to look at the servo horn.. the one in the first picture.. Looks like it has a split in it where you have screwed the ball onto it. It may work itself loose if you are not careful.


Andy

[Xige]

Hi Andy,

Thanks for your reply. Yes your right, well spotted. Thanks for that, I'll have to change that.

[adieuk]

eagle eyeslol well spotted andy

[machasm]

Looks great but might I suggest that you loosen the wires from the servos a little?
Also you want to protect them where they are bending round the chassis and where they have been tie-wrapped in.
After some use they can chafe against the chassis and eventually cut through the wires!
Granted you have the GF frames and they are not as bad for this as the carbon ones.
I use spiral wrap which can be purchased from Maplins here.
Not only does it protect the wiring but also makes the whole job that bit neater.

[Xige]

Thanks Adrian. Yep you're right on that.
I do have some braided cable wrap but its a bit too small as I got the wrong size. I'll get the 8mm size I think next time.
Cheers