Tweet
HI GUYS problem 1 is when i plug my esc into ar6200 light flickers and goes out nothing works and prob2 is other times the motor just beeps every 2/3 sec until i unplug bat cant re bind any ideas going on now for 3 weeks cant figer out thanks guys
-
-
Have you a good battery & fully charged as I had same thing turned out to be knackered battery.
If you can try another battery & bind agian making sure on TX all switches are back & throttle down.Today's outlook is fine for flying.- Spektrum DX18 gen2, Phoenix Sims, Align MR25XP.
- Blade Nano, mCP X, 130x, Blade 180, Mini T 450se
- Trex 250dfc Gpro, Trex 500EFL Gpro.
- Trex 600E Gpro DFC, Trex 600NSP now Gpro, DFC, Redline 56
- Flickr Through My Pictures.
- A helicopter is an aircraft that is lifted and propelled by one or more horizontal rotors because Wikipedia said so.
-
hi got 3 good charged bats and i cant rebind therse no power on the receiver but when i test therse 5 volts going into it so therse power from esc into receiver tried new esc same thing happens stuck
Comment
-
no power sorted
hi guys just to say got my problem sorted out it was my dx6i 
Comment
-
i had this problem with my blade today and it was down to a loose wire, i re soldered it and its fineNik.
Before you ask:
About 2 miles
Over £500Very difficultOver 80mphNO, you can't have a go
Don't forget the 'Search' and 'Thanks' buttons.
RIP Anthony 'Tinny' Lombardi (25195517)Comment
Comment