Announcement

Collapse
No announcement yet.

Help me please?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Help me please?

    I have an esky honeybee cp2. was a crimbo present. Well anyhow i crashed it, like you do lol. my main rotors have slight damage (chips out of sides) and my tail rotor has a chip in it. When i give throttle the tail tries to spin one way, however when i get full power it just spins out of control. there is no correcting it. i am confused lol. also it tries to pull back alot. any help wud be great. Cheers
    Tags: None
  • #2
    buy some spares and rebuild and before you fly it again check out radds flight school or just take it really slow

    Comment

    • #3
      Confused newbie

      Originally posted by craigyard123 View Post
      I have an esky honeybee cp2. was a crimbo present. Well anyhow i crashed it, like you do lol. my main rotors have slight damage (chips out of sides) and my tail rotor has a chip in it. When i give throttle the tail tries to spin one way, however when i get full power it just spins out of control. there is no correcting it. i am confused lol. also it tries to pull back alot. any help wud be great. Cheers
      You will need a lot of time and a lot of practice to be able to even hover. Even then you will only be at the start of learning. Read through this forum and look for mcx and Phoenix sim. If you can find someone local you can ask them to have a look at it or the model shop should be able to help.
      Chris
      Flasher 450 Sport. Assan GA250 with 520 tail servo, MKS DS450 cyclic.
      Multiplex Cockpit Tx, DX7, DX6i
      Blade 130-X, MSR, MSRX
      Phoenix Sim

      Comment

      • #4
        Originally posted by cjcj1949 View Post
        You will need a lot of time and a lot of practice to be able to even hover. Even then you will only be at the start of learning. Read through this forum and look for mcx and Phoenix sim. If you can find someone local you can ask them to have a look at it or the model shop should be able to help.
        Chris

        i flown the 4ch honeybee before, could hover and that. just wanting to know why its doing what its doing. the bloke in my model shop said he didn't know anything about the honeybees, so am lost.

        Comment

        • #5
          craig,

          It could be a number of things .............you have to narrow it down.......I am guessing the tail is spinning anti clockwise which suggests the tail motor is damaged .......as the post before suggests ..... read and learn

          all the best mate
          THERE IS A DIGNITY IN SILENCE....

          BUT A LIKE MY RAPPY'S

          Comment

          • #6
            Ok. That's not a problem that can't be sorted out. Shame about the model shop. First thing then is to find a good heli shop you can get to.
            Flasher 450 Sport. Assan GA250 with 520 tail servo, MKS DS450 cyclic.
            Multiplex Cockpit Tx, DX7, DX6i
            Blade 130-X, MSR, MSRX
            Phoenix Sim

            Comment

            • #7
              Have you got training gear? If not get some and run it up slowly on a smooth slippery floor and post a vid.
              Flasher 450 Sport. Assan GA250 with 520 tail servo, MKS DS450 cyclic.
              Multiplex Cockpit Tx, DX7, DX6i
              Blade 130-X, MSR, MSRX
              Phoenix Sim

              Comment

              • #8
                will be a while looking for one lol. cheers mate.

                Comment

                Previous template Next
                Working...
                X