Tweet
Why is the esc on the blade 400/twister storm mounted with the heatsink next to the fuselage? Isn't a heatsink meant to have airflow over it? Mine got so warm it fell off. Is it only mine or do you have to glue the servo tape to the heatsink?
-
Flasher 450 Sport. Assan GA250 with 520 tail servo, MKS DS450 cyclic.
Multiplex Cockpit Tx, DX7, DX6i
Blade 130-X, MSR, MSRX
Phoenix Sim -
it should be mounted with heatsink away from the frame -
So the instructions are wrong?Flasher 450 Sport. Assan GA250 with 520 tail servo, MKS DS450 cyclic.
Multiplex Cockpit Tx, DX7, DX6i
Blade 130-X, MSR, MSRX
Phoenix SimComment
-
I turned mine the other way from the photos in the manual,i.e. heatsink fins out. I also had to use a tiewrap. I did change it due to overheating, signs are loss of power and very hot after a few minutes normal flying.Comment
-
dunno never read them!!! the blade comes assembled! and thats how it is
Comment
Comment