ccpm on jr10x

[clart]

hi,

i'm pretty new to helis, i ve had a raptor 30 for a few weeks now and am getting there with my hovering.... i bought a jr 10x off e-bay becasue it was a bargain.... but for christmas the missus has bought me a twister 3d with the ccpm control system... can anyone tell me how to set this up on the 10x as after searching and digging round i'm lost.... :?


thanks

[Ade_Law]

i am not familer with the 10x but a little bit of digging on the macgregor website soon found a link to the 10x manual.

http://www.horizonhobby.com/ProdInfo...656-manual.pdf

page 46. Seems to describe it in depth.

Ade

[clart]

i am not familer with the 10x but a little bit of digging on the macgregor website soon found a link to the 10x manual.

http://www.horizonhobby.com/ProdInfo...656-manual.pdf

page 46. Seems to describe it in depth.

Ade

ops: the phrase cant see the woods springs to mind... thanks ade... the 10x manual is pretty heavy reading tho... 8O

[Ade_Law]

right, I have just tried to read the manual rather than just having a glance over it!

your right. its not the easist of things to read.

by the looks of it:

go to "code 65" which is the swash mix screen.

touch "select" then change that to 3 servo 120deg

plug the servos in as per the diagram on page 47.

put the pitch slider/nobs to centre and move the stick to centre.

disconnect the motor from the speed controller, and switch the model on.

Now, the trick is to not worry about which direction the swash is travelling but that the servos are moving in the right way relative to each over.

i mean that when you move the collective the swash moves up/down but it might not move up when you push the stick up. to start with you might find 1 of the servos goes the wrong way. If this is wrong use "code 11" to reverse the direction of each servo independantly.

Now you have the servos working with each other check the directions. You will probably find that at least one of the controls is reversed so when you move the collective upwards you get negative pitch or when you push forward elevator the swash tilts backwards. Go back to "code 65" you will see you have 3 values one for each control. the default values are +60% to reverse the direction of a control you simply change +60% to -60%

that should get you in the right ball park.

Ade, at parents hiding :-)

[clart]

thanks ade think i'm getting my head round it now.....


clart...