Dip switch settings dragonfly 39 servo connect to rx

[ecurb]

can anyone tell me what the dip switch settings are on dragonfly 39 also which servos plug into which channels on the receiver my young son has played about with it and mixed them up will be very gratefull for any help anyone can give.
Thanks Bruce

[Ade_Law]

I cant give you the exact info you need but I can help you work it out.

I am going to assume its "mode 2" that meaning that the throttle is on the left stick.

If you have a 4cell nicad/nimh battery then plug that into the reciever or unplug the motor from the speed controller. This will ensure the main rotor doesnt start up by accident.

then plug the servo that makes the swash plate tilt left/right into channel 1 on the reciever.

The trick is to plug one servo into the reciever and work out what goes where from there.

If you need a bit more detail let me know.

Ade

[blade]

I also have a dragonfly 39 so let me know if you still require the settings etc for the rx/tx

[chopperman]

no 39

hi blade,

i just got the no 39 not flown it yet , how are you finding yours can you tell me a couple of things, where to put the battery for a start, and how do i use the poxy charger that came with it. as soon as i put the batt on charge both the lights on the charger stay on, so im not sure how long to leave on charge for .

thanks
gary

I also have a dragonfly 39 so let me know if you still require the settings etc for the rx/tx