DX6i and Phoenix FS

[GSH]

Hi everyone,

I'm having a weird problem and hope you can help.

I have control of my heli's in the Phoenix FS but seem only to get 75% power, I take off and can rise to a mighty 2 foot in the air.

I've done the following already:

• New Model on the TX
• Model Set to Heli
• 1 Servo set
• Calibrated in Pheonix (Channels 1 and 6 respond to Throttle movement) and show full range in calibration, all the way up to 100%.

So now I'm stuck, I like flying but really want to break the two foot limit lol

Thanks

GSH

[Made2Fade]

Have you got a descent idleup curve programmed in the TX? Also do the advanced calibration.
Cheers
Lee

[GSH]

Thanks Lee,

I will check my idle up curve, any advice on the best setup?

Thanks

[Made2Fade]

I program mine just like my 50 nitros. Set it to a V curve. Something similar too :- 100,85,75,85,100 or ya could just have a flat line 100 (100,100,100,100,100).
Cheers
Lee