Twister has run out of trim

[V70R]

Hey all,

Can anybody enlighten me how i can adjust my rudder servo on my Twister Medevac?

It is currently on full starboard trim and it still creeps - given i dont have a rudder servo im not sure what to adjust - ie take servo arm off and move to give me more 'trimage'....

As always - any insight greatly appreciated

Best
Darryl

[David Drew]

On the 4 in 1 there is a pot called the proportional.(little screw adjuster).

Turn it a very little to the way the heli goes, left in your case, and disconnect / reconnect the batt to get the set to remember the new setting.

This should do it. remember that the trim does change as the batt discharges so do this trimming after about 5 mins of flying.

David

[V70R]

Cheers David - id completly forgotten about those adjusters!! Big thanks

[Kwickkwack]

Good thing to remember is to set the trim in the middle with a new battery and set the potentiometer to hold at this point, this way you will have a little trim adjustment available as the battery becomes discharged