batterys

[Dean airwolf]

Hello guys and girls
Just got hold of a blade 360CFX so what batterys are people using.
Still learning so not got to be for 3D flying.
Thanks in advance.
Dean

[Dean airwolf]

Hello all
No one's got blade 360CFX on here regarding lipo they are using
Thanks

[james_2k]

wouldnt they be the same as your 450l?

[myxiplx]

Don't know about the 360CFX, but for the Gaui X3 the Turnigy Nano-Tech 6S 1550mAh are low cost packs that seem to have a decent reputation.

I'm flying Gens-Ace 6S 1450mAh packs on my own X3 and they've been rock solid, very nice packs.

Most 360mm machines take similar packs, just double the manual and the battery dimensions to ensure they'll fit.

[tomatwalden]

The 360cfx is quite a light heli. Also, unlike the X3, the packs fit under the canopy so larger mAH may foul the canopy. I'd stick with 1300mah packs - keep the heli light and avoid making the canopy tight.

EDTT : I tend to use Haiyin packs, so I'd probably look at this : Haiyin - 6S 1300mAh 35-70C High Discharge LiPo Battery - Electriflyer

[cycled]

You could have a look here and see what others are using. But bear in mind a lot of them are in the USA and have different packs available locally.

[Nick_C]

The 360cfx is quite a light heli. Also, unlike the X3, the packs fit under the canopy so larger mAH may foul the canopy. I'd stick with 1300mah packs - keep the heli light and avoid making the canopy tight.

EDTT : I tend to use Haiyin packs, so I'd probably look at this : Haiyin - 6S 1300mAh 35-70C High Discharge LiPo Battery - Electriflyer

+1 on what Tom says,i used these Haiyin in my 450l and they worked great