Century GL450SE & DX7

[Talisa]

Due to interference in my cul-de-sac at home which has resulted in both broken fingers and nearly full speed blade into my knee, I have had one of my Century GL450SE converted to 2.4GHz and bound and setup to a DX7 transmitter. My local model shop set it all up for me and I saw it fly in the shop and it seemed super stable and I have total trust in the guy that set it up for me.

Apart from using the DX7 with Phoenix Sim, I never flown a heli with it and I am finding that the controls seem super sensitive. Where as before with my W-FLY 35MHz I could hold a pretty good hover anywhere, now I am all over the place.

Am I doing some thing wrong or is the a setting/switch on the DX7 I can flick or change that will dull the whole control system down. It feels like a millimetre in any direction is full on control surface change. I am sure that is an exaggeration but I hope you get what I mean

Regards,

[heliward0]

well on my dx7 its the two flip switches on the left and right .. the alerion d/r and the elevator d/r i run mine at 20%d/r and this calms my 450 down

[heliward0]

have a look here mate,, dx7 setup from helifreak you may need to register if you havent doneso,,http://www.helifreak.com/showthread.php?t=28681

[Talisa]

Thanks, I will go look now. Already registered to get the bbuild videos for my 600CF

Thanks

[Talisa]

Oh my lordy lord. I have watched that video and shall not be touching a thing on my DX7. That video I am sure is very good however it is not something that an inexperienced flyer such as I am even going to tackle. I might just take it back to SMC and run through it with them.

Thanks Anyway.