Cable connector advice

[Bluenose75]

Ok so got my board and my connectors, what would you recomend to use to connect the tiny cable to the great big cables on the board?

image.jpg

[pug907]

Any connector like the EC3/deans etc will do the job. Or just solder the 2 wires together if your soldering is any good?

[kenny d]

Normally you pick the board with the connectors your using !! Is it the jst connectors for your 200 srx ? , what I use is is. JST Multi 6 Way Charge lead | eBay. For £4 delivered then use the board for the just-xh (balanced) connectors or just solder the ones you've got , Kd

[waveydavey]

Ok so got my board and my connectors, what would you recomend to use to connect the tiny cable to the great big cables on the board?

[ATTACH=CONFIG]80619[/ATTACH]

A big soldering iron

[bigpops]

I'd buy some connector block to connect them temporarily, and then buy the lead suggested above, and use the board for balancing.

[Bluenose75]

All done! no more single charging can do up to 6 in one hit! iMax charger £22.00 board and cables £7.50, pretty chuffed

WP_20150216_001.jpg

[SGD]

I was looking for something to do the same job a while back and in the end I bought a Parallel Charge Board for JST-XH & JST from ProgressiveRC in the States at a cost of £12.25 inc post. It's a really neat compact unit and does 2 and 3S packs.

ProgressiveRC - Parallel Charge Board for JST-XH & JST
ac-pcbjst.jpg

[pug907]

Happy days!