easy copter V2 expert

[richyzf]

Hi all

just after some advice on my easy copter V2 expert. Everytime i put the helicopter in the air and everytime i try to move forward, back left or right etc, the blades seem to hit each other and down she comes. Any ideas what im doing wrong and also where is the best place to get spare parts.

Thanks Rich

[Made2Fade]

please elaborate... which blades as the (a) and (b) blades are miles apart? You sure its the blades and not the fly bar hitting the top blades?
Lee

[richyzf]

hi

please elaborate... which blades as the (a) and (b) blades are miles apart? You sure its the blades and not the fly bar hitting the top blades?
Lee

Could be the fly bar because its the top/a blades that seem to be breaking.

[Made2Fade]

okay then... check the centre of your flybar isnt worn where it fits into the hub on the top of the shaft. Thats probably your problem. How olds the heli? How many flights/crashes you had? Also check the link that goes up to the flybar... it could be worn or damaged.
Lee

[Boggy]

are the blades too slack in the grips?? they should be tight enough so they will just move if you shake the heli

[Made2Fade]

are the blades too slack in the grips?? they should be tight enough so they will just move if you shake the heli

Yip could always be that too...
Lee

[richyzf]

okay then... check the centre of your flybar isnt worn where it fits into the hub on the top of the shaft. Thats probably your problem. How olds the heli? How many flights/crashes you had? Also check the link that goes up to the flybar... it could be worn or damaged.
Lee

Cheers it does look worn and the blades were too slack and now to top it off ive put the plugs back on the reciever the wrong way, smoked like mad now not working, think im better off flying my hawk lol, any ideas on spare parts please as it looks like a new reciever too. Crashed a few times as i just cant get it to take off strait tried adjusting it but to no avail. says EASY copter lol, cheers for your help