Buddying Up

[t4ttyt3ddy]

Hi all

I have a quick question.

I have a DX6i and the Tx that came with the BCX2.

My wife would like to start having a go on the CX2 but is scared of crashing my Heli!

I wondered if it was possible to link these two together with a Buddy lead and if so how would I go about it!

Oh and she does have a practice on Phoenix and is ok at it!

Cheers Guys

[Boggy]

i dont think it will work bob, but for the sake of a few quid there is no harm trying. you will need a mono male to mono male lead. plug both tx's together and hold the trainer switch on the dx6 forward. (dx6 bound to the cx2) then waggle the sticks on the cx2 controler. if you get movment you may be lucky.

dx6 would be master so try and match your wifes throttle movment. and be ready with cyclic. if she gets into trouble let go of the trainer switch and you have control.

if it works of course!!

[t4ttyt3ddy]

I'll get me a cable and give it a whirl and let you know how it goes