esky lama blade change

[NEWBIERON]

hi can any one pls tell what tools needed and how to change blades .eg: how tight .cheers ron

[rockers]

your need a hex driver/ allen key is it jsut the blades you are changing? i do mine up so they dont flap around but are not tight so if i did crash they would fold up instead if they were done up too tight and just snapping as no give.

[NEWBIERON]

cheers mate . do you know what size allen key i need and what do you use for the nut . thanks for your help . do you have an esky lama v4 . cheers ron.

[rockers]

yes i do, dont use it as much now as got a x400 to play with, its between 2 and 3 mm allen key. with the bolt just hold onto it it will start griping on the plastic and stop itself from turning. what blades are you putting on it ? i brought these white extra strong thing ones off ebay to put on mine, not had one break yet, went through the first lot quick

[NEWBIERON]

just the ones that came as spares, but i have read about the white one , are they called exterme blades, cheers for your help mate.

[Made2Fade]

Yip thats the ones i have on mine... i can vouch that they are much stronger. They look better too. One of the worth while upgrades for it.
Lee

[NEWBIERON]

cheers lee, still ogling over your vids mate. great flying. ron.