Hummingbird tail motor problem

[enjay]

The small gear cog on my Hummingbird tail motor has dropped off!

Do I need to replace the motor or can I just stick the cog back on? If the latter what's the best method.

Thanks

[G-DAVE]

I take it we're talking about the brass motor pinion--
If so it can be glued back on with Cyno/super glue if it's a good fit or with Epoxy if it's not..make sure all the old glue/oil/etc is well cleaned off.
When using Cyno be carefull to only get the glue where you need it.
Dave