how do i link tx-rx

[windydaniel]

just brought a second hand t-rex align with a futaba r606fs and cannot get it to link to my transmitter?
it has the quick link button on the rx but still wont link,can u use a bind plug on this type and if so how and where do i put it
and ideas!!!

[marktigere1]

The bind plug is used by Spektrum TX and RX's.

Its just a short across two pins in the RX.

I'm not familiar with the 2.4GHz Futaba stuff but thought you simply pressed the bind buttons as you describe.

Cheers

Mark

[windydaniel]

yes thats what i thought but have tried this a few times now and i dont work,the lights should flash green but all i can get is red flash

[marktigere1]

Have you contacted the seller and asked them how they bind the TX?

Might be worth a quick call.

Cheers

Mark

[robgt]

Are you using a 2.4ghz Futaba Tx?
If not, the 2.4ghz receiver won't work with it...
Cheers,
Rob

[windydaniel]

ahh that could be why iam trying to link a different make tx........think that could be it then,have to buy a futaba tx.....
many thanks for the replys

[marktigere1]

Are you using a 2.4ghz Futaba Tx?
If not, the 2.4ghz receiver won't work with it...
Cheers,
Rob

Well spotted Rob.

How do you do it Holmes

[robgt]

Lucky guesses
Cheers,
Rob