Belt CP - Factory set-up

[SUBARU26675]

Hi there,

This is my first post on here so go easy please !!
I have been flying the Honey Bee FP for a couple of months and have now upgraded to the Belt-CP, basicallyt for more stability in the breezy conditions we get up here in Aberdeen.

The question I have is this , I have bought mode 2 but thought with this helicopter the tail rudder controls were supposed to be on the right hand stick as per the manual, but my rudder is on the left stick along with the throttle control.
My right hand stick controls the elevator pitch (as expected) and the Aileron control.

These are the same way as the honey bee FP was configured so I am quite happy with it as it is what i have already learned, but is it right enough ?

Thanks in advance,
Kevin.

[glen_j]

mode 2 is rudder and throttle on left stick matey

[RichT1969]

Hi,

I'm new to this too but I have also just bought an ESKY BELT CP. I can confirm that the mannual is wrong and it is set up correct for Mode 2 rudder and throttle on left.

Rich

[SUBARU26675]

Cheers guys, thought I was losing it there, yep the manual is wrong lol.

Kev.

[Rat]

According to the setup in pheonix, the control setup you describe as being in the manual is Mode 4 (?)