Servo's for a interceptor 400

[bishbash25]

Had some issues with my inty 400 since i have had it and it was a pre built one too so really ready to fly NOT.

Decided to strip it down today got myself a couple of pitch guages (i was told by a heli guy its easy to get a pair and balance on blades to set) and a 90 degree swashplate tool.

To my suprise (again sarky) it was miles out so set this back level but noticed servo was loose never really check this but clamp areas snapped on one side so loose servo hence not a constant movement.

So looking now to change this its a acer lab A8 8g servo for another type digital maybe I also have a Acer Lab G1000 gyro.

For now as im still learning i was looking to swap rear servo for a digital one for better HH this correct? and was looking at the turnigy MG90s will this size be ok for my inty 400 and replace rear with this one and add rear 8g back up front to replace broken one?

Any advice on this would be great.


Bishbash

[Raptormad2]

Hi I have an inty 400 I have align ds415 servos on the swash and align ds 420 on the tail used to have a g1000 gyro but changed it for a futaba 401 works a treat. Hope this helps.

[bishbash25]

Thanks for that isn't that futaba gyro £100+ to buy tho?

Just bit pricey for me at the moment.

[danch]

get yourself a Spartan Quark gyro, simply one of the best gyro's & can be picked up for about £30 s/h

Dan

[Raptormad2]

Yes the Spartan quark is a really good gyro I have them on my other helis I only used the 401 because I had on in my box.

[nobbycopter]

There are gyros in the for sale section like this one http://www.rcheliaddict.co.uk/sale/9...0mah-more.html only £25 so I guess within your budget?