Blade 130x

[Alexis Rojas G.]

I got a blade 130x with Spektrum DX6i,and I flew it maybe 20 to 30 times,no problems at all,then I desided to fly it and plug the batery as usual but it just didn't make any beeps,it just get to light blue,all servos work normal,but the motor does not spin,it just does not work...
At first I thought it was a dead motor,then I bought a new one plug into the batery but nothing happens,so I have no idea what the deal would be...
Any advise please?,I need help from someone please,please.....
Best Regards..
Alex,

[tomatwalden]

First of all, check your TX. I forget the DX6i layout, but somewhere in the menu you will find a "monitor" screen. Leave the heli off, but go into this screen and move the left stick up. Look for the "throttle" response on the monitor and ensure it follows accordingly. For example, in throttle hold, you'll get no movement. But in normal mode, you should see the throttle values mimicking your throttle curve.

If that's fine, and you're get a solid blue light on the heli (not flashing) or anything then it sounds like you've got a problem with the main board. Your best bet then is to send it back to Horizon Hobby in Essex. Their customer service is extremely good. Chances are, they'll fix it free of charge. Give them a call first to explain the problem. You can find their contact details at Welcome to Horizon Hobby UK

Best of luck.

[tomatwalden]

Sorry, just noticed you're in Austria. I think your closest HH is Germany Horizon Hobby Modellsport - Ferngesteuerte Flugzeuge, Hubschrauber, Autos und Boote

[Mike Sanders]

Your nearest might be

Horizon Hobby GmbH
Christian-Junge Strasse 1
Elmshorn
4941214619960