Torsion Tail Blades

[Guest]

Just got me some Torsion tail blades
Suppose to be 96mm but they measure 106mm

The one's I've got have a near square leading end, which the pictures show as 96mm.
The 106mm have a rounded leading end

Have I got the wrong blades or the pictures are wrong
Any one got some 106mm they can measure?

With these tails fitted, they are only 1mm from the horizontal fin

Thanks

[Tom Burgess]

If you have 106mm and you ordered 96mm then i would take a guess you got the wrong ones

[Tom Burgess]

you are measuring from the bolthole to the tip right?

[waveydavey]

Mine are 96mm and thats what they measure

[Guest]

From centre of hole to the trailing tip it measures 98mm
So it would be 96.5mm bolt edge

Replacing the plastic tails from the Knight which were suppose to be 95mm
These 96mm Torsions are 10mm longer
I don't like the fact they are 1mm from the horizontal fin

[raptorheli2]

those are 96mm blades then. all blades are measured from middle of bolt hole to the tip.

the ones you have currently will be 85mm i guess which is not right on a 50 size.

cheers

[madman3d]

Hi, i run the 96 tail blades on my K3D Factory and they are just brill.