Announcement

Collapse
No announcement yet.

Which blades for Vision90 FBL?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Which blades for Vision90 FBL?

    OK, so should I go for Edge, Radix or ALIGN? Normal or FBL?

    Or other? Fast Lads have 10% off all radix blades, but they're still not cheap to say the least (the blade in general I mean, not fast lads lol).

    They'll be going on a Vision 90 FBL, most likely a BeastX setup (possibly CGY750, but I doubt I'll be able to afford it).

    Cheers!
    12
    Edge Normal
    0.00%
    0
    Edge FBL
    66.67%
    8
    Radix Normal
    0.00%
    0
    Radix FBL
    16.67%
    2
    ALIGN
    8.33%
    1
    Other, please state
    8.33%
    1
    Last edited by Planehazza; 06-03-2011, 11:32 PM.
    Harry

    Mikado Logo 700 | VBar Neo | JR HV Servos | Pyro 750-50L | Kontronik Kosmik 160HV + buffer pack|
    Thunder Tiger G4 E720 | CGY760 FBL | BLS272SV + BLS276SV | Align 800MX Dom 440kv | Kontronik PowerJive 120HV + Opti UltraGuard |
    SAB Kraken 580 6S | Spirit FBL | BLS173SV + BLS276SV | HK4025 1100kV | Kontronik Kolibri 140LV + Opti UltraGuard |


    And a pillow for the doghouse...

    Powered by Futaba 18SZ

  • #2
    I can't edit the poll, but the best ALIGN option is the 690D I think.
    Harry

    Mikado Logo 700 | VBar Neo | JR HV Servos | Pyro 750-50L | Kontronik Kosmik 160HV + buffer pack|
    Thunder Tiger G4 E720 | CGY760 FBL | BLS272SV + BLS276SV | Align 800MX Dom 440kv | Kontronik PowerJive 120HV + Opti UltraGuard |
    SAB Kraken 580 6S | Spirit FBL | BLS173SV + BLS276SV | HK4025 1100kV | Kontronik Kolibri 140LV + Opti UltraGuard |


    And a pillow for the doghouse...

    Powered by Futaba 18SZ

    Comment


    • #3
      EDGE imo but i run radex on my 700 beast X EDGE on my 500fbl 3G and on
      my 600n beast X

      i belive EDGE and radex are the same.
      GAUI X7 Beast X V3 (a nice bit of fish!)
      Trex600n Fbl ys56sr BeastX V3
      Trex500Fbl AR7200BX
      Trex500 Apache x4bld BeastX. Trex 600E HIND mil x5bld BeastX
      DX7se

      Comment


      • #4
        Purely my opinion here http://www.rcheliaddict.co.uk/main-b...des-worth.html

        Radix fbl got my vote.
        No difference in price compared to FB blades but FBL blades are designed different (weight wise) so this is obviously for a reason so FBL blade all the way.


        Great blade
        + 7 x Eddies finest EGS's


        Comment


        • #5
          Originally posted by Jamin_00 View Post
          FBL blades are designed different (weight wise) so this is obviously for a reason so FBL blade all the way.


          Great blade
          GAUI X7 Beast X V3 (a nice bit of fish!)
          Trex600n Fbl ys56sr BeastX V3
          Trex500Fbl AR7200BX
          Trex500 Apache x4bld BeastX. Trex 600E HIND mil x5bld BeastX
          DX7se

          Comment


          • #6
            Bump
            Harry

            Mikado Logo 700 | VBar Neo | JR HV Servos | Pyro 750-50L | Kontronik Kosmik 160HV + buffer pack|
            Thunder Tiger G4 E720 | CGY760 FBL | BLS272SV + BLS276SV | Align 800MX Dom 440kv | Kontronik PowerJive 120HV + Opti UltraGuard |
            SAB Kraken 580 6S | Spirit FBL | BLS173SV + BLS276SV | HK4025 1100kV | Kontronik Kolibri 140LV + Opti UltraGuard |


            And a pillow for the doghouse...

            Powered by Futaba 18SZ

            Comment


            • #7
              Edge FBL edge FBL edge FBL..... love em.. (If Radix FBL didnt have gay colouring.. I would try them!)

              PS.. HOW BIG IS YOUR SIG Harry!?!?! Another new site glitch that needs to get sorted!
              Eddie
              Velocity 90 FBL BeastX V3
              Trex 600 LE FBL BeastX V3
              Trex 500 EFL Pro BeastX V3
              Fusion 50 FBL
              VBar
              All powered by a DX8

              Comment


              • #8
                yeah it was massive. I had it that way so when the forum resized it so it wasn't intrusive, you could still click it to go full size. I've just replaced it with a basic text version, with a forum matching colour scheme.

                Thanks for the info too. I just can't decide whether the Edge blades are worth the extra cash.
                Harry

                Mikado Logo 700 | VBar Neo | JR HV Servos | Pyro 750-50L | Kontronik Kosmik 160HV + buffer pack|
                Thunder Tiger G4 E720 | CGY760 FBL | BLS272SV + BLS276SV | Align 800MX Dom 440kv | Kontronik PowerJive 120HV + Opti UltraGuard |
                SAB Kraken 580 6S | Spirit FBL | BLS173SV + BLS276SV | HK4025 1100kV | Kontronik Kolibri 140LV + Opti UltraGuard |


                And a pillow for the doghouse...

                Powered by Futaba 18SZ

                Comment


                • #9
                  Theres no need to change your sign to normal Harry.. its a site glitch.. not having a dig at you mate :-)

                  I do find a difference with Edge FBL blades compared to Align D's for my level of flying.. everything is much sharper but spot on sharp. As already mentioned, the COG is moved further out to aid stability too.. thats why F3C/FAI pilots use them too for flybarred heli's.. its also weighted leading edge aswell on some. On smaller heli's some notice bigger difference to the flight characteristics.. such as no "bounce" on hard stops etc. Its totally up to you mate.. Yes they are better imo and also a little too pricey aswell.. maybe £10 less would be the right price for them! :-)
                  Eddie
                  Velocity 90 FBL BeastX V3
                  Trex 600 LE FBL BeastX V3
                  Trex 500 EFL Pro BeastX V3
                  Fusion 50 FBL
                  VBar
                  All powered by a DX8

                  Comment


                  • #10
                    No I knew you weren't, I'd actually changed it when you posted - it must have been seconds after you posted that I clicked the save button as I came straight back to this thread

                    Cheers, only got 3 hours left on the 10% off radix deal so I need to hurry up and decide lmao.
                    Harry

                    Mikado Logo 700 | VBar Neo | JR HV Servos | Pyro 750-50L | Kontronik Kosmik 160HV + buffer pack|
                    Thunder Tiger G4 E720 | CGY760 FBL | BLS272SV + BLS276SV | Align 800MX Dom 440kv | Kontronik PowerJive 120HV + Opti UltraGuard |
                    SAB Kraken 580 6S | Spirit FBL | BLS173SV + BLS276SV | HK4025 1100kV | Kontronik Kolibri 140LV + Opti UltraGuard |


                    And a pillow for the doghouse...

                    Powered by Futaba 18SZ

                    Comment


                    • #11
                      Its really depends on whether your comfortable with flying black/dark blades.. if you dont mind then go for the 10% off Radix.. if not.. go Edge
                      Eddie
                      Velocity 90 FBL BeastX V3
                      Trex 600 LE FBL BeastX V3
                      Trex 500 EFL Pro BeastX V3
                      Fusion 50 FBL
                      VBar
                      All powered by a DX8

                      Comment


                      • #12
                        Well I have Radix on my Vision90. Never realised it made a difference as they're spinning that fast lol
                        Harry

                        Mikado Logo 700 | VBar Neo | JR HV Servos | Pyro 750-50L | Kontronik Kosmik 160HV + buffer pack|
                        Thunder Tiger G4 E720 | CGY760 FBL | BLS272SV + BLS276SV | Align 800MX Dom 440kv | Kontronik PowerJive 120HV + Opti UltraGuard |
                        SAB Kraken 580 6S | Spirit FBL | BLS173SV + BLS276SV | HK4025 1100kV | Kontronik Kolibri 140LV + Opti UltraGuard |


                        And a pillow for the doghouse...

                        Powered by Futaba 18SZ

                        Comment


                        • #13
                          I have edge 690 fbl and radix 690 fbl both fly well just prefer edges as they are easier to see the disk


                          Sent from my iPhone using crapatalk
                          Kel Velocity 50 sk-720 ,Fusion 50 v-bar pro 5.2 ,Velocity 90 v-bar pro 5.2 & JR DSX11 ,Phoenix and a fridge full of bottled water RCHA Courier Services PM for Details www.parcelshipper.co.uk and www.impactexpress.co.uk

                          Comment


                          • #14
                            Cheers millerman
                            Harry

                            Mikado Logo 700 | VBar Neo | JR HV Servos | Pyro 750-50L | Kontronik Kosmik 160HV + buffer pack|
                            Thunder Tiger G4 E720 | CGY760 FBL | BLS272SV + BLS276SV | Align 800MX Dom 440kv | Kontronik PowerJive 120HV + Opti UltraGuard |
                            SAB Kraken 580 6S | Spirit FBL | BLS173SV + BLS276SV | HK4025 1100kV | Kontronik Kolibri 140LV + Opti UltraGuard |


                            And a pillow for the doghouse...

                            Powered by Futaba 18SZ

                            Comment


                            • #15
                              Originally posted by Planehazza View Post
                              Well I have Radix on my Vision90. Never realised it made a difference as they're spinning that fast lol
                              Your standard Radix still shows a little as its got white tips.. the FBl are mostly black with a little offset white which wont show up as well as the Edge as me and Kel says.. it is whether your comfortable with it mate.. btw.. the Poll says it all! lol!
                              Eddie
                              Velocity 90 FBL BeastX V3
                              Trex 600 LE FBL BeastX V3
                              Trex 500 EFL Pro BeastX V3
                              Fusion 50 FBL
                              VBar
                              All powered by a DX8

                              Comment

                              Working...
                              X