Announcement

Collapse
No announcement yet.

HDX600 GF and CF Blades.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • HDX600 GF and CF Blades.

    I have gone through a few sets of 600 blades now and have used Align CF, Align GF, Torsions and woodies.

    I found on ebay HDX600
    HDX 600mm Main Blade RC Align Trex 600 600CF Helicopter on eBay (end time 11-Apr-10 10:30:18 BST)

    HobbyKing 600GF
    HobbyKing Online R/C Hobby Store : .60 class Fiberglass Main Blade 600mm $14.72

    Hobbyking 600CF
    HobbyKing Online R/C Hobby Store : .60 class Carbon Fiber Main Blade 600mm $25.99


    All of the above I have used and can say that after todays flying I will not be buying Align blades again as they are virtually identical.

    Well worth a try at $14

    Mike
    Mike
    www.RC-Scotland.com

    T-Rex 700G G270 DS610s GP750/DS650
    TZ Frenzy .53 Red Line
    T-Rex 600 .52 ASP
    T-Rex 600 .80 ASP 4ST

  • #2
    how do they auto? the ones with the "3D" on them
    Jack

    Team KDS factory pilot flying the..

    Agile 7.2 & 5.5

    All controlled by the awesome Futaba 14SG

    Sponsored by:
    Climb
    -Out
    Optifuel && Optipower
    MidlandHelicopters
    Kontronik ESC & Motors


    Comment


    • #3
      I use the 3D ones on the Pro, not bad blades at all.

      Only downside is they dont take a knock too well.
      x 3

      Comment


      • #4
        not sure how they auto from substantial height, but being the same shape as the align blades id imagine it will be okay.

        align blades dont take a knock either, wasnt impressed seeing the foam fall out of them on my last crash.
        Mike
        www.RC-Scotland.com

        T-Rex 700G G270 DS610s GP750/DS650
        TZ Frenzy .53 Red Line
        T-Rex 600 .52 ASP
        T-Rex 600 .80 ASP 4ST

        Comment


        • #5
          if they auto anything like the align blades from a substantial height then i wont be using them especially what happened to my LE this weekend, nuff said
          Jack

          Team KDS factory pilot flying the..

          Agile 7.2 & 5.5

          All controlled by the awesome Futaba 14SG

          Sponsored by:
          Climb
          -Out
          Optifuel && Optipower
          MidlandHelicopters
          Kontronik ESC & Motors


          Comment


          • #6
            Originally posted by sacko View Post
            I use the 3D ones on the Pro, not bad blades at all.

            Only downside is they dont take a knock too well.
            I have a pair of 325mm for the 450 and have flown with them a little bit and so far like the way they feel. They are much stiffer than any other blades I have for the 450. (by the way I shoe-horned those '3D' tail blades on but had to sand
            away quite a bit of material and they still fit tight but seem to work well so far)

            A couple years ago I got a pair of what looked like HongKong Radix copies and in a boom strike one of them split at the edges like a pea pod.
            Kasama, Minicopter, Henseleit, JR, Shape, Beam
            Robbe, RMJ Raptor gasser, powered by
            Spartan, Spirit, BeastX, Kontronik, CY Total-G, DX8

            member of Epsom Downs and Bloobird clubs
            Proud recipient of 7 EGS! and a platinum star

            Comment


            • #7
              What are the HDX600 blades like are they worth getting.

              I keep seeing people ask what the different blades are like for auto's what difference do the blades make to this.As auto's are somthing I'm just starting to learn

              cheers
              Not sent from my iphone

              Comment

              Working...
              X