Well its comming

[Disc]

Hi
Ordered my pred gasser today the 23cc version.

Also ordered the cppm A metal upgrade arm.

should be here middle of next week.


:twisted:

[Disc]

Hi
question are these servos any good for the gasser:

Futaba 9202 Coreless Servo 5.0kg/0.22s

x3 for everything but pitch and tail.

I will put a stronger servo on pitch though a 9252.
and prob on the tail as well.

[Ade_Law]

the predator is CCPM you will need 3 servos the same to the swashplate.

9252 have been replaced by 9255 so they are getting rare. I use 9252 on my knight 50 and they are great.

for a LONG time 9252 have been the industry standard for a quality CCPM setup. But 9255 seem to do the job too from what I have seen.

Ade

[Disc]

Hi
found my servos at around 48 pounds each new 9252s.

Gyro and servo combo hunt is on but found a new 401 plus
servo 9254.

Now battery packs are Li-pos any good yet? Perkins do a regulator
for 25-30amps to 4.8volts which should power the electris well?

Anyone had any experiecence with this type of battery?

[Ade_Law]

I use a fromeco regulator and li-ion battery in the 90s it gives 10+ flights, 5.6v constant and it stays at that through the entire charge.

http://www.fromeco.org/

I friend had one of the cheap regulators from a local shop which was found to be the cause of large amounts of noise. The thing wouldnt get beyond a few feet with the aerial down.

Ade

[Disc]

Hi
Collected the Gasser today its been at the shop 3 days but work
meant I could not collect it....

The Predator 23cc was the one I was after.....

Got the 26cc SE version has come instead!

Not sending it back kept after all at the price I paid dam
bargin of the year for a new Gasser :twisted:

Servos ordered as well just awaiting to choose gyro and servo
combo and battery pack.....

Hopefully next weekend it might fly as I have next week off.......

[Disc]

Hi
Just got a 601 and 9521 Servo combo to collect 2nd hand but
the price is right enough.

Now just need to build it... er this is a bit of tricky one..... :roll:

[Stuart]

I've just had to order direct a 23cc Hanson engine. Shipped on Friday for Cautro Gasser. Should fingers cross be here next week. Get some pics into your gallery.