Question on Tarot ZYX setup

[muscleflex]

Sorry - another question.
Dual rates, Pitch Curves and Expo, do I set them on the transmitter or on the ZYX unit itself (I'm using the USB interface)

[robski]

Hi, All are set through the tx.I would start with the recomended 40% for the expo and go from there as they can be twitchy.

[muscleflex]

Thanks - and yeah - it was kinda twitchy yesterday when I test hovered it in the garden.
That reminds me, I need to upload the video. Will link it here when I've uploaded it.

[Made2Fade]

Hi, All are set through the tx.I would start with the recomended 40% for the expo and go from there as they can be twitchy.

I can second that as i flew Davies last week

[choppertastic]

This is my setup file.. I'm struggling to get a decent % on the gyro tho... wags like a dog on crack if I wind it up much more on my tranny (currently 67%)

[Mikej]

This is my setup file.. I'm struggling to get a decent % on the gyro tho... wags like a dog on crack if I wind it up much more on my tranny (currently 67%)

How high is your gain and what tail servo - I have found that these need a good tail servo to work well

[choppertastic]

Well looking at the config file I would say my tail gain in the ZYX is 100 and it's set to 67% in the TX. Tail servo is a Savox SH-1257MG

YawGain=100