Zyx s gyro settings please

[Pj1969]

Hi guys, I've rebuilt my 450pro dfc and managed to set the tarot zyx s up via PC, but have forgotten what values to put in the TX for gyro. I fly in HH mode and can't remember what is was before I rebuilt it. Also I need to find out how to change the tail gain in the software, it's currently on -51/51 and I believe it needs to start at 36%. Any help would be great.

[Mikej]

Hi guys, I've rebuilt my 450pro dfc and managed to set the tarot zyx s up via PC, but have forgotten what values to put in the TX for gyro. I fly in HH mode and can't remember what is was before I rebuilt it. Also I need to find out how to change the tail gain in the software, it's currently on -51/51 and I believe it needs to start at 36%. Any help would be great.

The easiest way is to go into the Monitor page and adjust your gain in the Tx so that it shows 36 for the Gain channel. From memory the DX6 is 0 - 50 for Rate and 50 - 100 for HH.

assuming you have Tx set for 1 servo / 90 / degrees swash / normal

[Pj1969]

Yeah got it set 1/90, how do I adjust it in the tx? Is it travel adjust or another programe?? Can't for the life of me remember. Thanks for help Mike

[Mikej]

I think there are a couple of ways - you can either use the Gyro Sense menu (at least that is what it is called on the DX7), or you can use the Gear Channel using EPAs (End Point Adjustments) - basically in the INPUT SELECT screen you assign GEAR to the Gear channel and then go to TRAVEL ADJUST screen and set your Gyro gain values on the gear channel

[Pj1969]

Cheers mate, will give them a go and see what I can get it down too. Appreciate the advise