Announcement

Collapse
No announcement yet.

Small tail kick

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Small tail kick

    During pitch pumps,kicks to the right.....manual says;

    Collective to Tail:
    This parameter mixes a percentage of the
    collective pitch to tail rotor pitch, thus pre-compensating for any
    additional torque as a result of repid cyclic inputs.

    Do i need to go higher or lower?

    Angelos,typo...repid!
    T- rex 600n V-bar
    Logo 550sx V-bar
    Logo 600sx V-bar
    Logo 600sx V-bar night flyer

    VBControl, but not the gay white version as i'm simply not gay enough to pull it off!

  • #2
    If the tail goes to the right I would think you'd need to increase it. Too much torque means the heli kicks counter clockwise on a clockwise rotating head. Too much compensation would be a kick in the same direction as the head rotation
    Harry

    Mikado Logo 700 | VBar Neo | JR HV Servos | Pyro 750-50L | Kontronik Kosmik 160HV + buffer pack|
    Thunder Tiger G4 E720 | CGY760 FBL | BLS272SV + BLS276SV | Align 800MX Dom 440kv | Kontronik PowerJive 120HV + Opti UltraGuard |
    SAB Kraken 580 6S | Spirit FBL | BLS173SV + BLS276SV | HK4025 1100kV | Kontronik Kolibri 140LV + Opti UltraGuard |


    And a pillow for the doghouse...

    Powered by Futaba 18SZ

    Comment

    Working...
    X