MSH brain & 600n v2 swash selection.

[panosg]

Hi guys, I searched but cant find the answer I need!
Setting up my Brain, but I am stuck on the swash selection!
The heli is a 600nitro V2 ltd edition with a dfc head.

Must say the rest of the set up went really well. Very simple.


Here is a screen shot on what I am stuck. One of the top ones on the right. But which?

[rapidgaz]

H3 120 mate.

[panosg]

H3 120 mate.

Brilliant thanks mate.

[GIXERMAN]

h3 120 +1

[Sesame]

Im using the Brain on my 600n after initial problems its settled down now and im really pleased with it.

My only complaint now is the pc software as I think it sucks. ive been trying to update the unit and as yet all that happens is the software falls over, thats of course when I can actually get it running. but the unit is solid.

[HighFreq]

Im using the Brain on my 600n after initial problems its settled down now and im really pleased with it.

My only complaint now is the pc software as I think it sucks. ive been trying to update the unit and as yet all that happens is the software falls over, thats of course when I can actually get it running. but the unit is solid.

Sorry for that, we are working on it and expect to release a fix for the problem asap. Glad the unit itself is working good.

To update the unit did you try force it in bootloader mode and than connect it to the pc and update?

To force it in boot mode: short the 2 central pins of the frontal 4 pin jst connector on the unit and power it, the red led will light solid, now remove the short from the pins and leaving the unit powered connect it to the pc and run the update.

Let me know if it worked.


Corrado

[Martind]

Hope all go's well tomorrow Panos I have to setup my sk now

[Sesame]

Sorry for that, we are working on it and expect to release a fix for the problem asap. Glad the unit itself is working good.

To update the unit did you try force it in bootloader mode and than connect it to the pc and update?

To force it in boot mode: short the 2 central pins of the frontal 4 pin jst connector on the unit and power it, the red led will light solid, now remove the short from the pins and leaving the unit powered connect it to the pc and run the update.

Let me know if it worked.


Corrado

no not tried that one yet, but then I crashed it this weekend, so could be a few days till I get the chance now lol
thanks for the info will definately give it a go asap

[Downdraft]

no not tried that one yet, but then I crashed it this weekend, so could be a few days till I get the chance now lol
thanks for the info will definately give it a go asap

And there was me about to post a photo, but you owned up just in the nick of time

All joking asside, while the machine was in the air it was rock solid especially in the hover. We had at least 30mph gusts yesterday and when you let go of the sticks it just sat there. I was surprised if I'm honest mate, if only you could fly as well as the Brain then ya Heli wouldn't be broken

[Sesame]

Er thanks I think LOL.

I'll post it before you get the chance, as the fact of the matter is it was all Downdrafts fault, if he had had a go when I had offered it to him, my inept thumbs wouldn't have had the chance to push the collective the wrong way oops!.



so ill post it before you get the chance lol.

but Sean is right the unit was performing very very well.

[panosg]

Hope all go's well tomorrow Panos I have to setup my sk now

Thanks Martin.
It went very well indeed thanks. The Brain rocks in my opinion. Was great out of the box. Done the basic set up and assign my giro switch to change the three different flying models.
Had an easy 4 flights on Sunday and was solid in the air. The feel was great, and been my first nitro made it that much more special.

Just come in from a couple flights and had a go on the 3d flight mode. Rolls and flips made it very smooth and easy. Very very nice, but I think the settings is more of a sport flight. Just perfect for me.

Overall I am very pleased with the brain.
Well done to MSH. We have a winner!!


P.S. does anyone using nitro and governor with the brain can post or pm me a tutorial on how to set it up please. Never used governor before so I am a bit lost there. I am using the align sensor and magnets and I check on the software that reads my magnets......but after that I am a bit