V Bar Guv problem

[jwatts007]

Hi, trying too set the V Bar guv up on my 700, when I go into idle up 1 or 2 the HS dies, I am after 1800 in 1 and 1950 in 2, it shows it is picking up the magnet on the interface, I have set the correct ratio, my throttle curve is 100-60-100 can anyone help me here as it got me baffled......Thanks

[sacko]

What radio?

[jwatts007]

DSX9 Paul..

[sacko]

You should be using Aux2 to set your requested headspeed.

Is that what you have done?

Ill find a video online when I'm home..

[jwatts007]

Right I have got it on the Gear channel and gyro on AUX 2...

[sacko]

Have a look on MrMels channel on Youtube. Will be easier to follow than me explaining it.

.. I'm sure he is demonstrating with a dsx9 too.

[jwatts007]

Will do thanks....

[sacko]

Just had a look at video 14 and is running off the curves, which you can do as well.

Have you assigned Aux2 to your Flightmode switches?

[jwatts007]

Thats what I have got too look at now, I reckon it is reading the gyro sense which would explain it, I have got too assign the gear channel to the guv and aux 2 too gyro sense, I am sure this is what is wrong...Thanks for your help.....

[sacko]

You're making this hard work lol..

Run it off Aux2 (channel 6 in the channel assignment, I think?). When you change the Aux2 position, the requested headspeed should change. Once you have that, assign aux2 to Flightmode.

[sacko]

[jwatts007]

Ok will do I find this V bar hard too set up.....

[jwatts007]

All done and sorted now also sorted my end points for the guv as shown in the vid, roll on a flying day so I can get out and try it, big big thanks.....

[sacko]

Result

Let us know how you get on.