Neo express issues binding

[chris427]

I've just swapped to Neo express thinking it was an upgrade over the vortex.
It's given me nothing but hassle from day one.
I've reg'd it, done the updates, bound it to a JR dsx2 on DSM2 and went to the set up wizard.
I got it all set up to the part where you centre the servos using the pc link and had to call it a night.
I went to finish the set up and it will not bind. The satellite doesn't light up and the neo just goes in to bind mode and thats it.
I got it to bind once and it went in to a flashing orange light so i turned it off and it'll not bind or recognise the satellites no matter how many i plug in. They show an orange light as i plug them in but nothing after and the light goes out.
It's driving me mad now. Vbar web pages and forum are just as bad. Registered, confirmed user name and password, go to log on not registered so apart from taking a hammer to this POS what else can you suggest?
All batteries are fully charged.
Neo on the work top powered up and nothing, installed on the heli, still nothing.
It connects to the pc and updates fine, shows its connected to my Imac but just will not do bind or light up the satelites.....................HELP!!

[trillian]

I know nothing about the Neo. But, I have sometimes had bind issues and what has worked for me is to bind using the Vortex, then take those two sats and just plug them into the other FBL, in your case the Neo.

[chris427]

I know nothing about the Neo. But, I have sometimes had bind issues and what has worked for me is to bind using the Vortex, then take those two sats and just plug them into the other FBL, in your case the Neo.

I've sorted it 0ut now, seems it hadn't initialised correctly so i started again. worked first time after that although 1 sat is solid light and 1 is flashing so that'll come off. It's all set up now, hopefully but waiting for a servo extension from ESC to Neo as it's rather tight then i can get the wiring sorted out nice and tidy and i'll give it a whirl and see how it is.