VBAR Help!!!

[Gate88]

I knew I should never have got involved in anything that relies on computers to set up!

3 hours now Ive been downloading, unzipping, registering, and pi$$ing about when I could be out flying a nitro with a BeastX on it.

How the f**k do I bind a mini Vbar to a DX8 please please tell me cause I'm about to put a match to this!

[Ross Northcott]

you must break the power to the vbar for a second or 2 after you press the bind on the vbar

[GIXERMAN]

Plug in Vbar to software

go to bind section where u pick Rx type

press bind and and unplug power quickly then power again

[Nick B]

Yes,as simple as that...pmsl

[Gate88]

you must break the power to the vbar for a second or 2 after you press the bind on the vbar

Yea Ive tried that it keeps saying "Transmission Error"

[Ross Northcott]

Power up heli, go into vbar software reciever page, press bind, break the power source to the vbar ie diconnect battery and quickly plug back in, then do the bind in the radio as normal, the 2 sats should start flashing after you plug power back into the vbar after breaking it

[Ross Northcott]

Yea Ive tried that it keeps saying "Transmission Error"

Close down the vbar page and re open it all should be fine then

[jwatts007]

On mine which are DMSS with a DSX9...choose spektrum satellites digital centre...then the box appears too bind click on that...turn off TX power on off quick on the heli and the sats will go into bind mode....

[Gate88]

Jeesus! Who in gods name buys these things when you can quite simply buy a Beast X and go flying???

[GIXERMAN]

Jeesus! Who in gods name buys these things when you can quite simply buy a Beast X and go flying???

Here comes another Paddy post

[Ross Northcott]

Jeesus! Who in gods name buys these things when you can quite simply buy a Beast X and go flying???

People who fly beastx and cant bind there radios to the vbar lol

[Gate88]

Right Ive tried.

Bind on the computer >> Cycle the power on VB >> Bind on DX8
Bind on DX8 >> Bind on Computer >> Cycle power on VB
Cycle power on VB >> Bind on Computer >> Bind on DX8

Ive tried simultaneously holding Bind DX8 while holding Bind on computer and cycling VB power, and cycling VB Power then holing bond on DX8 and hitting the button on the computer.

[Delarado]

You'll see the light

[Gate88]

Here comes another Paddy post

You aint wrong, Ive purposely kept away from these things cause theyre so complicated but everyone's always banging on about how easy they are to set up. This is insanity!

[GIXERMAN]

You aint wrong, Ive purposely kept away from these things cause theyre so complicated but everyone's always banging on about how easy they are to set up. This is insanity!

pm sent