Spektrum 7200BX Increase Cyclic Response?

[johnsandywhite]

I have just maidened my converted Trex 550FB to FBL with Spektrum 7200BX.
Apart from needing to adjust the Tail Gyro Gain to stop a buzzing wag, I was happy with the locked in feeling straight away.
However, I would like to increase the Cyclic response. ie: More Aileron and more Elevator.
Do I adjust 'G' in the Parameter Menu?

Normally I would increase the Swashplate percentages. But this is INH on the Tx for the Beast X.

In advance, many thanks.

[Gingerr6]

you want to increase the speed? if so i would adjust the endpoints in the radio... thats they way i do it?

[johnsandywhite]

I want to make the flips flip faster and the rolls to roll faster. The ATV is at 100%. Are you saying to increase it more?

[Cuppa]

Up or down faster/slower on end points you'l probably fined 115% a/e/p 110% rudder will be fast enough depends on how quick you like it have you been in the perams menu tail torque imo wants the higher setting if you pump anything else up and run pitch boost in 'H'. go up in small amounts rather than scare the bejeebers out of yourself lol have fun.

cheers
Cuppa

[jwatts007]

Yes increase it too 125% and use the Duel rates too get it how you like....

[johnsandywhite]

Thanks cuppa and jwatts007. Rudder is quite fast enough, in fact I might turn it down a little.

[tonystevens]

Do you have it in transmitter mode (parameter b) ?

[rasman2k]

That was gonna be my question

[EzSuprastar69]

Hi John As I said to you earlier increase atv in tx for more and decrease for less, you were on form today man !! like a recycled teenager not bad for a 57 year old!!!!!!

[johnsandywhite]

Do you have it in transmitter mode (parameter b) ?

No. Just standard as it comes more or less.

[johnsandywhite]

Hi John As I said to you earlier increase atv in tx for more and decrease for less, you were on form today man !! like a recycled teenager not bad for a 57 year old!!!!!!

57 year old recycled teenager? Nearly 69 actually, but for real I am only nearly 29 because life begins at 40. Yes Simon, you did mention the ATV and I was probably thinking how happy that the maiden went so well apart from the tail that it just didn't register. Besides, GT5s are different to Beast X.
Can't wait to fly again today and looking forwards to the next setting up a a VBarrrrrrrrrrrrrred TDR. Yahoooooooooooooo.

PS. I thought you were going to bed early so we could go first thing?

[crustysphinkter]

John you'll find it a lot better in transmitter mode, if its still in default the flip and role will be slow, change to transmitter mode the adjust either end points or duel rates to suit

Sent from my GT-I9100 using Tapatalk 2

[crustysphinkter]

Oh and if your not in transmitter mode i dont think the end points change anything. Oh and if you need any help with the vbar you know where i am. To be honest standard settongs on the vbar are good, paddle simulation is handy. What i do is have 2 or 3 different settings in the bank switching then flick between each one and see which i like. BUT REMEMBER TO COPY SETTINGS TO ALL BANKS FIRST BECAUSE IT INCLUDES THE INITIAL SETUP!!!!

Sent from my GT-I9100 using Tapatalk 2

[johnsandywhite]

Thanks Rich. I intend to try everything. Love the BX. Easier to set up than the GY611, CSM720 etc once you get your head around it.

[dani_r]

If you increase ATVs without setting the BeastX in Tx mode won't it see it as some sort of input error?